The professional floorman©&Mac246;s choice for durability and beauty is polyurethane. This high solids coating is crystal clear, hard and smooth. HARCO Polyurethane renders a beautiful high gloss, highly abrasive mar-proof finish that will not fracture, chip, peel or flake. Use alone as a natural finish or apply over oil base stains.

HARCO Polyurethane is available in a satin and semi gloss velvet luster. These trouble free finishes will not streak and have limited settling in the can. They give the wood richness, elegance and depth while providing the ultimate in protection.

HARCO Gloss Polyurethane can be used as a finish or sealer coat. Satin and Semi gloss polyurethane should only be used as top coats. For best results use HARCO Quick Dry Polyurethane Sealer as a sealer under polyurethane. It is not recommended to apply polyurethane over lacquer sealer.

QUICK DRY POLYURETHANE PRIMER & SEALER

#8500---Gloss
#8502&Mac220;Satin
#8501&Mac220;Semi-gloss

HARCO Quick Dry Polyurethane Primer and Sealer is formulated as a first coat sealer over bare wood for all HARCO oil-modified Polyurethane finishes. Manufactured exclusively from polyurethane resins, HARCO Quick Dry Polyurethane Primer and Sealer promotes excellent intercoat adhesion between the wood substrate, sealer and finish coats. It will dry in one hour on bare wood. HARCO Quick Dry Polyurethane primer and sealer can be used as a first coat sealer or as a primer and intermediate coat under polyurethane finish. Used by itself in a three coat application, HARCO Quick Dry Polyurethane Sealer available in gloss, satin and semi-gloss, will render a durable finish.

Moisture cure urethanes provide the ultimate in surface protection against abrasions, scuffs, chemical and solvent attack. It will retain its ultra high gloss finish longer than any other finish. It is ideal for use in kitchens or heavy traffic areas. The proven performer, HARCO Satin Moisture Cure is the original satin product. This single component, ready for use satin requires minimum mixing or additives and will provide a deep satin luster finish.

Gloss Moisture Cure Urethane should be used as a sealer and finish coat and can be applied over raw wood and stains. For best results, use Satin or Semi Gloss Moisture Cure as a top coat only, over a gloss sealer coat.

LACQUER SEALERS

#7600 - clear
#7700 - pigmented

HARCO clear Lacquer Sealer and Lacquer Sanding Sealer are job tested ,problem free products. They have built in blush resistance for humid weather months. They are ideal products to be used where a fast dry sealer is required. These lacquer products dry in minutes and will not raise the wood grain and will only slightly amber the floor. Lacquer Sealer is not recommended as a sealer for polyurethane products.